+7-916-228-70-05

alshinkv@mail.ru

Multihull beehives

Multihull beehives are manufactured in full accordance with the Russian state standard specification (20740-75). Suitable for both stationary and mobile apiaries. The set includes 4 bodies, each contains 10 frames (size 435x230 mm), bottom, inner roof and the roof. The price 175$.
All parts of the hive are interchangeable! They are made of pine wood (dried out to 8-10% moisture). Long experience has shown that keeping bees in multihull beehives promotes rapid growth of honey yield of the bee family and productivity increase – compared to other types of hives. Multi-hive are very easy to use, it allows you to manipulate the entire bodies, independently of each other (the formation of new families, slots expansion, honey extraction etc). this is the best solution for industrial hive beekeeping.

Technical specification beehives Ruta

The set includes 4 bodies, each contains 10 frames (size 435x230 mm), bottom, inner roof and the roof. All parts of the hive are interchangeable! They are made of pine wood (dried out to 8-10% moisture).

The body walls are 35 mm thick, height – 250 mm, sidewalls length - 496 mm, front and back wall length – 445 mm.
Inside dimensions: - 450 375 250 mm.
Walls are screwed to each other and glued together by waterproof glue.

Each wall has rabbets:
At the bottom and top (18x5 mm) to combine bodies together for transportation.
At the end wall (11x20 mm) for fixing the frames.
At the front wall in the center – round holes (d=25 mm) for bee entrance.
There are special hollows on the outer upper part of the body – for easy carrying.

Bottom is detachable. Width – 445mm, length – 520mm. There is bottom bee entrance cut out with landing slat. To prevent rotting if the hive is placed straight to the ground – special legs are fixed to the bottom (50x35mm).

Frames are standard: 435x230mm.

Inner roof outside dimensions: 520x445 mm, inside: 450x375mm. There are two special holes for additional ventilation.

Roof is flat – this allows compact transporting. All boards are glued with waterproof glue and form a shield. The roof is armed with zinc-coated metal.

Each hive is completed with frames. Each frame is perforated (for the wires). Hives are not painted, but it is fully prepared for painting and polished.
In total the set – bottom, 4 bodies, inner roof, roof, 40 frames – weights 43 kg.
The hive can be shipped non-assembled – in this case the size will be 0,25-0,26 cubic meter.

Payment and delivery terms

Term of manufacturing – 45 days after receiving 70% prepayment. Delivery is discussed separately.
Self-delivery address: Kratovo, Ramensky District of Moscow Oblast, Russia (40 km southeast of Moscow) or Kasimov, Ryazan Oblast, Russia.

Additional modifications:

We are very flexible and would be happy to discuss all your individual needs – contact us!

designed by DON siamese in moscow

Copyright 2011 HONEY MONEY. All Rights Reserved